Objective : Identify overall system
of the project
Procedure :
After done several research on the
system of wireless power transfer, i manage to create the block diagram that
will shows the flow and progress of the system. below is the block diagram
created:
sdsd
the system from the block diagram worked as follow:
 |
| Block Diagram |
- DC power source is use to supply 12 VDC to the system.
- In the inverter process of inverting DC to AC voltage resulting AC signal with certain frequency.
- The resonance capacitor then tuned the AC signal with resonant frequency.
- Primary coil create magnetic field as a medium of power transfer.
- Secondary coil collect the energy in magnetic field.
- The energy then is converted to DC voltage using a converter.
- The output from the conventer then fed to the load.
As to successfully design the project i need to get deep and further knowledge about the block diagram as created above.
